Did 4 washes total, 4 ounces of trich heavy flower that was too dry to smoke. It's still drying but looks like at least 15 grams, 4th was still produced another few grams. It's now been sitting in water overnight, worth another run?

Pressed 10g of bubble hash from my last grow. Bud was dried then frozen(I didn't like the finished buds) and washed a week later. I saved the 1st run for bubble hash and kept the 2nd and 3rd run for pressing. 10g in 6.5g out. Strong Sour Lemon(not pinesol) terps that transfer EXTREMELY well in a puffco. Very happy with the turn out! Doubled up 37u @165° for a total of 2-1/2 minutes. Fire in, fire out. 🤙

Loose resin getting weighed out before being pressed into rosin 🤙🏻🔥

I have a 8 gal Zeny washer, started with work bags but due to volume of biomass I switched to material directly in the washer. I'm running into the issue where when draining water between runs, ice and material get caught in the drainage port. Does anyone have any recommendations on products or ideas on how to put a filter on the drainage port so as to stop biomass/ice from clogging the drain/hose?

Doing the final dry on a mix strain of bubble hash. Ice Cream Cake, Vanilla Frosting, and Gary Payton. I have an old Rosin Tech press that I got for free. We will see how it goes.

4oz of dry trim only did 3 washes because I ran out of time. Does this look decent for a first run? Is it spread out enough to dry? Any advice is appreciated.

Which washer should I get. I’ve seen the sent recommended but there is this one that’s a little cheaper and didn’t know if there was a reason it would be worse. Any pointers would be appreciated as I’m going to order one soon. I have posted links below let me know which I should buy

Option 1:

https://www.amazon.com/Otyemart-Washing-Machine-Portable-Apartments/dp/B07R7TR6KF/ref=asc_df_B07R7TR6KF?mcid=e4d893056d8a3b748395eda4a9c97308&hvocijid=4258256061576306120-B07R7TR6KF-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=4258256061576306120&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9191894&hvtargid=pla-2281435177898&psc=1

Option 2:

https://www.amazon.com/ZENY-Semi-Automatic-Apartment-Traveling-Translucent/dp/B07MLWJZH7/ref=asc_df_B07MLWJZH7?mcid=1c6e3a095395362c943755e7cb37be76&hvocijid=2956188113446659764-B07MLWJZH7-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=2956188113446659764&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9191894&hvtargid=pla-2281435179058&psc=1

Tons of room for improvement, but it feels good to have the first run under my belt.

Hash pics are in real time as in now , the plant is my keeper planted extra late to push into multiple frost exposure territory , I do that on purpose, this plant caches up and the potency soars with days of a couple frosts. I have a heavy budrot inducing micro climate and the plants I so carefully select to run are absolutely tough as nails. I harvest with majority opaque cream with some blonde trichomes. Traditional frenchy tech , hand wash, air dried bubble.

So im getting into hash and now at the point of realizing a freeze dryer is tolerable expensive but a wine fridge will work fine out of couriosity what temps are optimal because i plan on buying a wine fridge very soon and got offered a great deal on one but it only stay between 45f-50f and im not sure if thats still a bit too high( i normally dry outside in 35-40f temps)

Ok. I ran 600 gs of FF “Deep Fried Ice Cream X Los celos from Umami. I’ve sieved it onto the parchment paper and it’s in pizza boxes (air drying). It’s in the same room I dry my flower. It’s around 65• and 58% rh with a fan moving the air around. I’ve got 4 pizza boxes that look just like this. My question is, how do I know it’s ready to bag and press? And once it is ready, what is that process? Back in the freezer before the bag or can I bag it at room temp? Thanks for any help in this process. I’ve done it before and fucked up my bubble somehow. It came out exactly like this and when I went to press, it became super solid with very little resin coming out. I’m hoping this run has better luck so I’m asking for advice before I press…. My press is a dabpress 12 ton with the hand pump.

I mean it indeed fully melts but it has no strong taste or smell. Subtle taste reminds me of thc carts. Source is Canada. Anyone got any idea on how to improve this?

More pics: https://imgur.com/a/oaLSDl6

I know it's ugly but it ended up being super easy this way! Now I always have easy access when I need to change. Didn't even have to heat up the tubing! But all the white stuff came off easy and whatever glue they used came off with an alcohol wipe after. Super excited to get started soon!

So the same upgrade... It's pretty big tubing, I don't think I have to remove all the old stuff.. I think I can cut @ the red line in pic 2... Soak the end of the new tube in warm water, slide over with that tightening do-hickey and tighten her up? Run a little soapy water in it, run clean water , spray down with clean water a couple times maybe and really make sure soap is gone and .... Ready for my first run??

When washing bubble hash I have learned/read/experienced that less ice is better. And we want the environment cold right above freezing. So my question is, with a 5 gal bubble wash machine, could I not just place it inside of a freezer and not use any ice? The cord will obviously run through the door, but I’m not trying to sell a product. Couldn’t I just put the water and material inside the Machine and place that inside of a bigger freezer with no ice? Pull it out and drain into a 5 gal res and let the water drain out. Then place the collection bags inside the freezer while I do the work to keep the temps cold? I’m in Florida so it’s hard to get the environment that cold. But I could utilize a garage freezer pretty easily. Just want to get a few opinions on how this may work. Thanks in advance.

Just washed a batch of fresh frozen whole plant live on my YouTube channel last night. If you want to watch the video, here's the link. Strain is Jelly Sickle #2 from IHG. 700g of fresh frozen whole plant.

I was curious about how much was left in my buds after having used it for making bubble hash.

I did 3 washes (5, 10 and 15 minutes - manual washing as my washing machine ain’t here yet) of 60 g dry and mixed OG Amnesia Auto and some Master Kush auto plus - got around 14-15% yield of bubble hash but was to tired to give it a 4th and 5th wash (as the color was still fine at the 3th) due to getting tired of doing it manually.

Decided to dry it again and try to do a BHO test on it to see how much I could pull from it.

Was quite surprised when I got 6,5 g shatter back from it - it’s a bit darker then I usually get it and will most likely be used for edibles (though I would still be ok smoking it).

I’ve thrown sooo much weed out after having washed it, but that ain’t happening any more.

What do you do with it after it’s washed?

rate 1-5

Pic one was hand pressed and pic two was pressed with a hot water bottle frenchy style