r/subaru 1d ago

I need help finding a hose

I’m finally in the cusp of fixing my car to stop the misfires. But there is a tear in my vacuum hose which while small has caused some slight hesitance with my accelerating. But nothing terrible. I do also have a dip in idling if I’m driving a lot that day. I can’t find the hose anywhere online can anyone help me

2 Upvotes

7 comments sorted by

3

u/jeremyt8783 1d ago

Can't turn a hose into a housewife

2

u/Dangit_Bud '06 Forester X Premium 5MT 1d ago

2

u/Capt_Vandal 1d ago

Only hoses that would cause an issue like that are the PCV hoses, one from each head to the air intake box, and one from the PCV valve to the throttle body. I would recommend you replace the PCV valve as well. Should be near the back passenger side of the engine on top.

As for the misfire, check the connections on the coil pack for corrosion and replace the plugs and the wires as well. If that doesn't fix it, then you probably have a compression issue.

1

u/TurboWeldon 1d ago

Is it not my brake booster hose I feel like that’s the issue

1

u/Capt_Vandal 1d ago

Do your brakes feel overly hard or squishy? That hose doesn't look bad, the PCV hoses crack from engine heat and leak, which will cause idle issues. A vacuum leak won't cause a misfire.

1

u/TurboWeldon 1d ago

Forgot to put it in the description but I drive a 1998 Subaru Forester

2

u/Much_Newspaper4453 Master Tech 1d ago

Looks like the booster hose is what you’re looking for. Looks torn right near the clamp. You could cut the ripped section off and should still be long enough to work and save a few bucks.