Marine products are usually for gel coat. So being that a pontoon is paint or powder coat, yes you can use any and all automotive products on that. Hard water stains are a BITCH just fyi. I really like hot sauce by boat bling just be warned it really smells like vinegar. All I really do for mine is wash it spray areas with hard water with hot sauce and spray wax or spray detail.

That’s where I’d start. Like if you used a magic eraser on my seats they’d be ruined.

The side wall panels are all separate squares. It’s really hard to detail. I’d be worried about the flooring. Inside and outside walls and rails. Furniture is where I’d really ask the manufacturer.

It’s not bad if you don’t have to touch the toons.

I mean what are you doing exactly? Pontoon have side walls. So 500-600 to wash the side walls and pressure wash the floor? Most vinyl manufacturers list what products they want on their furniture. Like my seats say to wipe them with warm water and ivory soap absolutely no chemicals. There isn’t a lot to “detail”.

In all honesty I would ask your customer what manufacturer boat and then reach out to the manufacturer. Side walls are painted or powder coated. Flooring can be vinyl or carpet but it’s glued down so nothing too harsh.

My tritoon does mid 50’s mph and that’s faster than a lot of speed boats! Tell him to take a look at tritoons with at least 250hp and he will not be disappointed!

2 hours labor yikes!!! That’s a little on the rough side. Or it’s $320/hr and it’s 1.5 including removing shields and setting level. It’s probably through the dash not 100% sure if they have a dipstick which can take 15-25 min letting oil warm up.

Why is that that? I’m noob wasted $40 and threw it all in the garbage. This and some other was all I saw.

Bolsters on the seats and the tach are dead give aways.

How about just the 14,000 lb truck on grass. Fuck the wheels! Your sinking fast!!

Does the breaker have line and batt on it? Is it hooked up the correct way? I’ve run into thrifter breakers that only work that way while the blue sea works either. Did you run a continuity test with the breaker open and closed and switch leads after doing it one way.

Right so like he said 2 of 5 winners. So 3 losers and 2 winners. Did you polish the axels too?

Dawn and water in a spray bottle and you should be siliconing around the wire that passes thru. Why waste money on shit?

Solder it 2000 is the best torch out right now period.

It’s a portisal

Or just rip the carpet off and put on poly slides. They say carpet is bad for toons because it can hold water and salt and oxidize and rot the aluminum. Idk

Does finest known charge a fee and shipping? Idk I equate it to wasting gas driving around trying to find it 5-10 cents cheaper. It’s not worth it to me.

I’ll be more than happy to take Otis if you think he isn’t intelligent enough for you. My pug can get specific toys I’m asking for. Shake, give high 5’s on command. And other things, he’s also quite fast and athletic.

Who said that?

There is a lot of information missing as others have said. Current wide open throttle rpm vs what your manufacturer recommends. Then the specs on your current prop.

I can help you out. I’ve learned a lot both from rc and talking with Ken(prop god) and local racers. The fastest prop on my boat has been a 4 blade. It’s different for different hulls and loading. I have a tritoon and as a non-planing hull I think I’ve got the best prop for me.

This is my go to for Bimini parts. If it were me I’d be calling and asking them or I’d be calling suntracker to find out where the original is sourced from.

https://store.canvas-boat-cover-and-repair-advisor.com

Kia’s has shitty paint is the only regret I have about my black Kia. It’s very thin and their clear blows.

Snap ring pliers. Cheap internal external, or some needle nose pliers(long nose or indexing should work. Might destroy either but should work.

We have ours on fresh pet select. Our last one started on beneful and finished his beautiful life on Fresh pet select.

I leave my welding blanket on year round. I also use ceramic fireplace blocks in the winter to help hold heat.

Just like I loved Mac tools because they had all those awesome John Force cars. And then I tried a Matco screw driver and it was all over from there.

Snap on re-brands a ton of shit. Basically anything and everything but their ratchets,sockets and wrenches.