Quick little spring break getaway 😭

Hey all,

This is something we’ve been working on behind the scenes for a while now. Some of you might’ve caught glimpses of it in our recent social media posts, but here’s a closer look at the concept.

This project came about because I wanted a way to create a practical AR-15 grip for Californians—something that could be configured for featureless builds, but also reconfigured (with a tool) for travel to free states (or for swapping between featureless and fixed mag uppers). This isn’t the final design, but pretty close. It uses a proprietary swivel joint to facilitate reconfiguration. Wanted to share it here and get your feedback.

Funny timing—someone posted a similar project yesterday (different design approach - props to them, they did a great job). Great to see likeminded patriots here pushing new concepts to preserve our 2A rights in California.

If there’s enough interest, we’re planning to move into a production run. Would love to hear what you think—what you like, what you’d change, what you’d want to see in the final version.

Thanks for taking a look!

Gen 5 Glock 45 stippling package wrapped up here in SoCal with the following mods: wraparound layout modification, smooth single undercut and textured index points. The wraparound layout mod is great if you aren’t using a backstrap or magwell, and want the most grip possible. It also helps reduce the grip size and feel of the usual Glock hump in the rear.

LINK

Purchased 250 rounds of Blazer ammo with it along with a third mag. Can't wait to take it to the range.

Finally got my stripped lower out of jail.

This is my first build and I'm really excited to try it out.

Just waiting on my bolt carrier group. And it will be done.

.308 AR10

Hello, this has probably asked a lot before. Hypothetically, if someone owned an AR type rifle, with all featureless hardware. Fixed stock, fin-type handgrip, barrel thread protector... Would he need to be concerned about possibly breaking any firearm laws, or getting hassled by LEOs or range officers? I don't suppose there would be a way to have a rifle "signed-off" as legal, and not needing to worry about those types of things?

How hard is it to get it in SD? The main thing being the good cause statement, I’m familiar with the entire process but what is a valid reason to put on the good cause statement? Nobody has threatened my life or anything so I’m not too familiar on why this is a thing.

Decided to install a Smith & Wesson M&P pistol grip to my featureless AR. Fin cut from Kydex, JB Welded to the backstrap, then used a DIY sheet of HandleItGrips tape to help add texture and keep it all together. Functions well. Whenever I go to visit friends in free states to shoot I can just easily remove the backstrap and install one without a fin. No tools required.

California Sig P365 while trying to install optics a small part and a small spring fell out when optics plate was removed. Where does the spring go? Any video help to reinstall will be highly appreciated.

Back from getting it milled for the holosun. It came out great. Also got the front serrations and slide cuts

Bring your own ammo. If you wanna shoot the atlas you gotta bring something equally cool to let me shoot.

Here’s my handgun collection so far after about 2 years. I’m always debating in my head between an Sig P226 and 320 X5 Legion, but the recent Glock thing makes me want to build a G34 John Wick style. I absolutely love my 19C.

SIDE NOTE: Local gunsmith did me dirty. The mount on the Smith and Wesson EZ flew apart after only about 100 rounds!! Can anyone tell me what size screws I might need to get rid of the extra shim plate and where to order them? Thanks!

Was out there shooting and the ranger show up telling everybody that they are going to lock the gates on the 15

Where can I find affordable magazine for this firearm ?

Hi folks I noticed something odd on my sig this spring is visible behind the trigger. Is this normal or did I reassemble to fcu wrong

I have this Glock G19 that I purchased new 6 years ago. In the time I had it, I’ve only shot 20 rounds from it when I took a basic handgun safety class 4 years ago, so I don’t think this thing is even broken in properly. Is there a range close by in Oakley CA (CoCo Country) where they have classes, potentially even enrolling in classes for obtaining my CCW license?

I’m a n00b, so I’d really appreciate tips on visiting a shooting range in terms of etiquette (outside of obvious safety considerations) that patrons frown upon when a n00b enters the room.

I really want to brush up on skills, get into this hobby and eventually ‘connect’ with my weapon, but it sucks that in California, if you have a conversation discussing firearms, and you own firearms, then you start getting judged by some people.

So long story short my dad is planning on sending me a gift in a couple months for my birthday of a P-09 C Nocturne and well it came with 15rd magazines. I spent about 30 minutes looking at a handful of websites but I can't find any that carry the 15rd magazine let alone the 10rd ones. So at this point I am thinking of having my dad send the magazines ahead or the handgun to get blocked and then sending them back to him to ship with the handgun because I was told it has to ship with compliant magazines to be releasable to me.

So I have 2 questions, first any suggestions on sites I can try to grab some magazines from. And second any suggestions on local shops in the greater Sacramento area I can have them shipped to and get them blocked if that is how that works? I don't know if there is an easier way to do this also so if anyone wants to advise me to one that would be appreciated. If it matters he lives in Texas.

I am returning a Holosun 507c to Glockstore (because I want an SCS for the Glock MOS.)

I go into UPS store and tell them the address where I’m sending my package including the name of the business.

Then they ask me what it is and I just say “optic” then the manager (side note: wearing a kimono) comes up and says “hold on. Is this an optic you attach to the firearm?” I said “yes” and he goes “ok, well in California you can’t ship firearms or firearm accessories”. I said “ok well I guess I know how to answer that question next time.” And left.

Went to another ups store and sent my “flashlight” back to Glockstore. But the more I thought about it the more I realized that had to be BS. Like there’s literally manufacturers of firearm accessories in California.

Took my Glock 48 and Springfield hellcat for some practice on the range. Did about 500 rounds in around an hour. Found the trigger safety on my Glock 48 started hurting my finger enough to mess with accuracy towards the end. Noticed a ridge on the end of the trigger safety which I believe is the problem. Has anyone else had this problem and just sanded the trigger safety down a hair to get rid of the ridge? Don’t wanna do too much since this gun is on my ccw.